Abu Bakar, M. (2012). Saturation effects on mechanical excavatability of sandrock under selected rock cutting tools. Ph.D. Thesis, Missouri University of Science and Technology, USA.
Bruland, A. (1998). Hard rock tunnel boring. Ph.D. Thesis, The Norwegian University of Science and Technology, Trondheim.
Eskikaya, S., Bilgin, N., Balci, C., & Tuncdemir, H. (2005). From research to practice: Development of Rapid Excavation Technologies. Underground Space Use: Analysis of the Past and Lessons for the Future – Erdem & Solak (eds), Taylor & Francis Group, London, 435-441.
Farrokh, E. (2013). Study of utilization factor and advance rate of hard-rock TBMs. PhD Dissertation, The Pennsylvania State University, USA.
Farrokh, E., & Kim, D.Y. (2018). A discussion on hard rock TBM cutter wear and cutterhead intervention interval length evaluation. Tunn Undergr Space Technol, 81, 336-357.
Farrokh, E., Kim, D.Y., & Kyung, S.B. (2015). Rotary cutting test for hard rock TBM Performance Evaluation. World tunneling conference, Dubrovnik, Croatia.
Farrokh, E., Rostami, J. & Laughton, C. (2012). Study of various models for estimation of penetration rate of hard rock TBMs. Tunn. Undergr. Space Technol., 30, 110-123.
Geng, Q., Wei, Z.Y., Meng, H. (2016). An experimental research on the rock cutting process of the gage cutters for rock tunnel boring machine (TBM). Tunn. Undergr. Space Technol., 52, 182–191.
Geng, Q., Wei, Z.Y., Ren, J.H. (2017). New rock material definition strategy for FEM simulation of the rock cutting process by TBM disc cutters. Tunn. Undergr. Space Technol., 65, 179–186
Gertsch, R., Gertsch L., & Rostami, J. (2007). Disc cutting tests in Colorado Red Granite: Implications for TBM performance prediction. Int. J. Rock Mech. Min. Sci., 44(2), 238-246.
Lislerud, A. (1997). Principles of mechanical excavation. Tamrock Corp, POSIVA 97-12.
Ozdemir, L., Miller, R., & Wang, F.D. (1978). Mechanical tunnel boring prediction and machine design. NSF APR73- 07776-A03. Colorado School of Mines. Golden.
Rostami, J. (1993). Design optimization, performance prediction and economic analysis of tunnel boring machine for the construction of the proposed Yucca Mountain nuclear waste repository. Ms. Thesis, Colorado School of Mines, Golden, Colorado, USA.
Rostami, J. (1997). Development of a force estimation model for rock fragmentation with disc cutters through theoretical modeling and physical measurement of crushed zone pressure. Dissertation, Colorado School of Mines.
Rostami, J., & Chang, S.H. (2017). A Closer Look at the Design of Cutterheads for Hard-rock Tunnel-Boring Machines, Engineering.
Roxborough, FF., & Phillips, H.R. (1975). Rock excavation by disc cutter. Int. J. Rock Mech. Min. Sci., 12(12), 361–366.
Tuncdemir, H., Bilgin, N., Copur, H., Balci, C. (2008). Control of rock cutting efficiency by muck size. Int. J. Rock Mech. Min. Sci., 45 (2), 278-288.
Zhang, Z., Zhang, K., Dong, W., Zhang, B. (2020). Study of rock‑cutting process by disc cutters in mixed ground based on three‑dimensional particle flow model. Rock Mechanics and Rock Engineering.
)